000 Gloss
Biohouse Clear Oil can be used as a clear finish by itself for all kinds of wood where a clear satin, water repellent and natural surface is desired. It can also used for outdoor if tinted with Biohouse Tinting Color. (as colorless finish do not provide UV protection)
It can also be used as primer on soft wood species, especially rough sawn wood, to equalize their absorbance capability before applying stains.
>Complies with the European Union Children's Toy Safety Standard EN71-3
>The dried product is safe for humans, animals, and plants
>Can be tinted with Biohouse Tinting Color
Color: Clear
Coverage: 6-7 m2/liter (2 coat/exterior)
Touch Dry: approx. 8 hours
0.75L
2.50L
20.0L
Clear
Preparation:
The surface of the wood before painting must be clean, dry, and frost free, with a moisture content of no more than 18%. Old paint must be removed thoroughly.
Wood polishing requirements: The surface of furniture is generally required to be 180-240 mesh; The floor surface is generally required to be 150-180 mesh, and the polishing dust needs to be removed after polishing.
Application:
Ready to use. Stir well before use. Please do not dilute.
If you need to mix colors, please add Biohouse Tinting Color and mix thoroughly. After the first coat of construction, the last coat of colorless oil should be used as the top coat.
Step 1: Use a hard bristle brush, lint free cotton cloth, or polishing machine (white or red nylon sheet) to apply a thin layer of paint along the wood texture. After 15 minutes, wipe off excess paint;
Step 2: During the drying process, it is necessary to maintain good ventilation to avoid the odor generated by abnormal drying;
Step 3: After the first coat is dry (colorless for about 8 hours, colored for about 8-24 hours, depending on the amount of Bohouse Tinting Color added), use Bohouse Polish #458 or 400-600 grit sandpaper to remove dust;
Step 4: Apply a second thin coat and wipe off excess paint after 15 minutes;
Step 5: Maintain good ventilation and dryness, and avoid using water to clean or cover the painted surface within 1 week.
Application amount: (on oak substrate as a reference)
1st coat: 80-100 g/m2
2nd coat: 50-60 g/m2
Tool cleaning:
Using Biohouse SuperClean Thinner 100.
Maintenance and renovation:
Depending on the wear, use BIOHOUSE Maintenance Oil 411 or Oil Care 418 for maintenance.
For renovation, apply a new coat of Clear Oil 000 without sanding.
Drying time: (at 20 ℃, relative humidity of 50%, with good ventilation)
Dust dry: approx. 8 hours
Hard dry: approx. 24 hours
Final hardness: approx. 1 week
Low temperature will prolong the drying time.
High humidity significantly prolongs drying time.
Poor ventilation can significantly prolong drying time and easily produce odors.
Shelf life: When not opened in a cool and dry place, it can be stored for more than 3 years.
Attention:
The cloth soaked in oil should be immediately put into water after use, and should not wrinkle into a ball to eliminate the potential risk of spontaneous combustion;
Keep out of reach of children.
Store in a cool place.