9600 Satin
9601 Matt
9612 Super-matt
Biohouse® Invisible Oil is a water-borne wood finish based on vegetable oils. It is ideal for light color wood such as oak, ash, beach or pine. After treatment, it maintains the original color and natural gloss of the untreated wood. Wood treated with this product is good in water resistance. It is suitable for all kinds of indoor wood products, especially for flooring and furniture. Invisible Oil is suitable for application by roller coaters or spaying guns, as well as by brush or rollers.
Invisible Oil is odorless and very low in VOC emission (VOC≤25g/L)
>Waterborne vegetable oil products
>According to ISO17226-1 standard testing, formaldehyde was not detected
>Low VOC, content<25g/L
>No irritating odor
>Complies with the European Union Children's Toy Safety Standard EN71-3
>The dried product is safe for humans, animals, and plants
>Can be tinted with Biohouse Tinting Color Aqua
Color: Clear
Coverage: 30-40 m2/liter (1 coat)
Touch Dry: approx. 1 hours
Re-coat: approx. 6 hours
1.0L (9601)
5.0L
Clear
Preparation:
The surface of the wood before painting must be clean, dry, and frost free, with a moisture content of no more than 18%. Old paint must be removed thoroughly.
Wood polishing requirements: The surface of furniture is generally required to be 180-240 mesh; The floor surface is generally required to be 150-180 mesh, and the polishing dust needs to be removed after polishing.
Usage:
Use immediately after opening the can, stir thoroughly without diluting.
If you need to mix colors, please add Biohouse® Tinting Color Aqua and mix thoroughly. After the first coat of construction, the final coat of colorless hard wax oil is required as the top coat.
Step 1: Use a hard bristle brush, lint free cotton cloth, or polishing machine (white or red nylon sheet) to apply a thin layer of paint along the wood texture. After 15 minutes, wipe off excess paint;
Step 2: During the drying process, it is necessary to maintain good ventilation to avoid the odor generated by abnormal drying;
Step 3: After the first coat is dry, polish and remove dust with 400-600 grit sandpaper;
Step 4: Apply a second thin coat and wipe off excess paint after 15 minutes;
Step 5: Maintain good ventilation and dryness, and avoid using water to clean or cover the painted surface within 1 week.
Recommended dosage: (using oak substrate as a reference)
1st coat: 35-40 g/m2
2nd coat: 35-40 g/m2
Tool cleaning:
After the construction is completed, it should be cleaned with water as soon as possible within 10 minutes.
Cleaning, maintenance and refurbishment:
Clean stains in a timely manner on a daily basis.
According to the wear and tear situation, use Biohouse® Maintenance oil 418 maintenance.
If it needs to be refurbished, there is no need to polish it, and it can be directly coated with hard wax oil.
Drying time: (at 20 ℃, relative humidity of 50%, with good ventilation)
Surface dry (non stick gray): about 6 hours
Hard drying: approx. 24 hours
Complete curing: after 1 week
Low temperature will prolong the drying time.
High humidity significantly prolongs drying time.
Poor ventilation can significantly prolong drying time and easily produce odors.
Shelf life: When not opened in a cool and dry place, it can be stored for more than 3 years.
Attention:
The cloth soaked in oil should be immediately put into water after use, and should not wrinkle into a ball to eliminate the potential risk of spontaneous combustion;
Keep out of reach of children.
Store in a cool place.