Preparation:

The surface of the wood before painting must be clean, dry, and frost free, with a moisture content of no more than 18%. Old paint must be removed thoroughly.

Wood polishing requirements: The surface of furniture is generally required to be 180-240 mesh; The floor surface is generally required to be 150-180 mesh, and the polishing dust needs to be removed after polishing.

Usage:

Use immediately after opening the can, stir thoroughly without diluting.

If you need to mix colors, please add Biohouse Tinting Color and mix thoroughly. After the first coat of construction, the last coat of colorless hard wax oil is required as the top coat.

Step 1: Use a hard bristle brush, lint free cotton cloth, or polishing machine (white or red nylon sheet) to apply a thin layer of paint along the wood texture. After 15 minutes, wipe off excess paint;

Step 2: During the drying process, it is necessary to maintain good ventilation to avoid the odor generated by abnormal drying;

Step 3: After the first coat is dry (colorless for about 6-8 hours, colored for about 8-24 hours, depending on the amount of Biohouse Tinting Color added), use Biohouse Polish #458 or 400-600 mesh sandpaper to polish and remove dust;            

Step 4: Apply a second thin coat and wipe off excess paint after 15 minutes;

Step 5: Maintain good ventilation and dryness, and avoid using water to clean or cover the painted surface within 1 week.

Recommended dosage: (using oak substrate as a reference)

1st coat: 25-35 g/m²

2nd coat: 15-20 g/m²

Tool cleaning:

Using Biohouse SuperClean Thinner 100 for cleaning.

Cleaning, maintenance and refurbishment:

Clean stains in a timely manner on a daily basis.

According to the wear and tear situation, use Biohouse Maintenance oil 411 or 418 maintenance.

If it needs to be refurbished, there is no need to polish it, and it can be directly coated with hard wax oil.

Drying time: (at 20 ℃, relative humidity of 50%, with good ventilation)

Surface dry (non stick gray): approx.  6 hours

Hard drying: approx.  24 hours

Complete curing: after 1 week

Low temperature will prolong the drying time.

High humidity significantly prolongs drying time.

Poor ventilation can significantly prolong drying time and easily produce odors.

Shelf life: When not opened in a cool and dry place, it can be stored for more than 3 years.

Attention:

The cloth soaked in oil should be immediately put into water after use, and should not wrinkle into a ball to eliminate the potential risk of spontaneous combustion;

Keep out of reach of children.

Store in a cool place.