9446 Satin
Biohouse® Natural White Oil is a natural-drying wood finish based on vegetable oils. It is fast drying and suitable for industrial application. It is suitable for all type of interior wooden products, especially for wooden flooring and furniture. Biohouse Natural Oil does not contain any harmful substances and is in compliance with
EN71-3 (suitable for children's toy) and FDA food contact safety.
>Can be used for roller coating, brush coating, and wipe coating construction on the assembly line
>Excellent resistance to yellowing and denaturation
>Complies with the European Union Children's Toy Safety Standard EN71-3
>The dried product is safe for humans, animals, and plants
Color: White transparent
Coverage: 20-30 m2/liter (1 coat)
Touch Dry: approx. 3 hours
Re-coat: approx. 6 hours
White transparent
Preparation:
The surface of the wood before painting must be clean, dry, and frost free, with a moisture content of no more than 18%. Old paint must be removed thoroughly.
Wood polishing requirements: The surface of furniture is generally required to be 180-240 mesh; The floor surface is generally required to be 150-180 mesh, and the polishing dust needs to be removed after polishing.
Usage:
Use immediately after opening the can, stir thoroughly without diluting.
After using natural white oil, a layer of colorless oil is required as the topcoat.
Step 1: Use a hard bristle brush, lint free cotton cloth, or polishing machine (white or red nylon sheet) to apply a thin layer of paint along the wood texture. After 15 minutes, wipe off excess paint;
Step 2: During the drying process, it is necessary to maintain good ventilation to avoid the odor generated by abnormal drying;
Step 3: After the first coat is dry (about 6 hours), polish and remove dust with Biohouse Polish #458 or 400-600 grit sandpaper;
Step 4: Apply a second thin coat and wipe off excess paint after 15 minutes;
Step 5: Maintain good ventilation and dryness, and avoid using water to clean or cover the painted surface within 1 week.
Recommended dosage: (using oak substrate as a reference)
1st coat: 25-35 g/m2
2nd coat: 15-20 g/m2
Tool cleaning:
Using Biohouse® SuperClean Thinner 100 for cleaning.
Cleaning, maintenance and refurbishment:
Clean stains in a timely manner on a daily basis.
According to the wear and tear situation, use Biohouse Maintenance oil 411 or 418 maintenance.
If it needs to be refurbished, there is no need to polish it, and it can be directly coated with hard wax oil.
Drying time: (at 20 ℃, relative humidity of 50%, with good ventilation)
Surface dry (non stick gray): about 6 hours
Hard drying: approx. 24 hours
Complete curing: after 1 week
Low temperature will prolong the drying time.
High humidity significantly prolongs drying time.
Poor ventilation can significantly prolong drying time and easily produce odors.
Shelf life: When not opened in a cool and dry place, it can be stored for more than 3 years.
Attention:
The cloth soaked in oil should be immediately put into water after use, and should not wrinkle into a ball to eliminate the potential risk of spontaneous combustion;
Keep out of reach of children.
Store in a cool place.