5700 Matt
BIOHOUSE® Hard Wax Oil 2C is a 2 component wood finish based on plant oils and carnauba wax.It can protect wood in1 single coat.
It is suitable for all type of interior wooden products, especially for wooden flooring and furniture.
The oil penetrates into wood and forms micro-porous, water repellent surface.
The surface will not crack,peel, flake or blister and is excellent in resistance to wine, coffee, tea , juice, cola,etc.
>In comply with EN71-3 (suitable for children's toys)
>Does not contain any harmful substances
>Can be tinted with BIOHOUSE® Tinting Color
Color: Clear
Coverage: 30-50m2/L (1 coat)
Dust dry: approx. 24 hours
0.95L (0.75L+0.20L)
3.20L (2.50L+0.70L)
无色透明
Preparation:
Wood surface must be clean and dry with maximum moisture content 16%.
It is recommended to sand the wood surface with sandpaper #180 or #240 for furniture or #150 or #180 for flooring.
Application:
1, Mix the oil (component A) and hardener (component B) at ratio of 10:3, stir thoroughly, stand for 10 minute;
2, Spread the oil with brush,cloth or buffing machine and apply one thin coat along the wood grain;
3, Remove surplus after 15 minutes;
4, Leave it dry overnight under good ventilation, otherwise odor may be caused by improper drying.
Do not clean the surface with water or cover the surface within 7 days.
If higher surface quality and better smoothness needed, apply a second coat.
5(Optional), After 24-36 hours, sand the dry surface with sandpaper #400, and remove the dust thoroughly.
Apply the second coat with same method as the first coat with lower application amount.
6(Optional), Remove surplus after 15 minutes;
7(Optional), Leave it dry overnight under good ventilation, Do not clean the surface with water or cover the surface within 7 days.
It can be tinted with Biohouse® Tinting Color and adding percentage should not exceed 25%.
Application amount:
1st coat: 30-50g/m2
Tool cleaning:
Use BIOHOUSE® Superclean Thinner 100.
Maintenance and renovation:
For daily cleaning, use water or water added with BIOHOUSE® Natural Soap 420.
For maintenance, use BIOHOUSE® Maintenance Oil 411 or 418 (aqua).
For renovation, Use BIOHOUSE® Hard Wax Oil. No sanding required before renovation.
A intense clean with BIOHOUSE® Natural Soap 420 might be necessary.
Drying time: (20℃,RH50%,provided good ventilation)
Dust dry: approx. 24-36 hours;
Hard dry: approx. 48 hours,
Final hardness: approx. 1 week.
Pot life:
Can be stored above 3 years if can is full and tightly closed.
Caution:
Do not crumple or fold the used cloth.Cloths soaked with oil should be placed in water immediately
after use to eliminate the small chance of self-ignition.
Store out of the reach of children.
Store cool place.