5300 Satin
Biohouse Hard Wax Oil is a wood finish made from fast curing plant oils and carnauba wax. It is suitable for indoor wooden products, especially ideal for wooden flooring, staircase or worktop that is subject to traffic or wear. The oil penetrates into wood and forms micro-porous, water repellent surface. The surface will not crack, peel, flake or blister.
Biohouse Hard Wax Oil does not contain any harmful substances and is environment friendly. The dried surface is food contact safety according to FDA 21CFR175.300 and suitable for children's toys according to EN71-3.
Biohouse Hard Wax Oil is labelled A+ under French VOC emission regulations.
>French VOC emission A+
>FDA 21CFR175.300 food contact safety
>EN71-3 suitable for children's toy
>EN12720 assessment of surface resistance to cold liquids
>EN12721 assessment of surface resistance to wet heat
>GB18580-2001 limits on formaldehyde emission of indoor decoration materials
>GB18581-2001 limits on harmful substances of solvent based wood varnish
Color: Clear
Coverage: 20-30m2/L (1 coat)
Touch Dry: approx. 6 hours
0.16 L
0.75 L
2.50 L
10.0 L
Clear
Preparation:
The surface of the wood before painting must be clean, dry, and frost free, with a moisture content of no more than 18%. Old paint must be removed thoroughly.
Wood polishing requirements: The surface of furniture is generally required to be 180-240 mesh; The floor surface is generally required to be 150-180 mesh, and the polishing dust needs to be removed after polishing.
Usage:
Ready to use. Stir well before use. Please do not dilute.
If you need to mix colors, please add Biohouse Tinting Color and mix thoroughly. After the first coat of construction, the last coat of colorless hard wax oil is required as the top coat.
Step 1: Use a hard bristle brush, lint free cotton cloth, or polishing machine (white or red nylon sheet) to apply a thin layer of paint along the wood texture. After 15 minutes, wipe off excess paint;
Step 2: During the drying process, it is necessary to maintain good ventilation to avoid the odor generated by abnormal drying;
Step 3: After the first coat is dry (colorless for about 6-8 hours, colored for about 8-24 hours, see Biohouse What is the amount of special color paste added), using Biohouse Polish #458 or 400-600 grit sandpaper to remove dust;
Step 4: Apply a second thin coat and wipe off excess paint after 15 minutes;
Step 5: Maintain good ventilation and dryness, and avoid using water to clean or cover the painted surface within 1 week.
Application amount: (on oak substrate as a reference)
1st coat: 25-35 g/m2
2nd coat: 15-20 g/m2
Tool cleaning:
Use Biohouse SupperClean Thinner 100.
Maintenance and renovation:
Depending on the wear,use BIOHOUSE Maintenance Oil 411 or Oil Care 418 for maintenance.
For renovation,apply a new coat of Hard Wax Oil without sanding.
Drying time: (at 20 ℃, relative humidity of 50%, with good ventilation)
Dust dry: approx. 6 hours;
Hard dry: approx. 24 hours,
Final hardness: approx. 1 week.
Low temperature will prolong the drying time.
High humidity significantly prolongs drying time.
Poor ventilation can significantly prolong drying time and easily produce odors.
Pot life: Can be stored above 3 years if can is full and tightly closed.
Caution:
Do not crumple or fold the used cloth. Cloths soaked with oil should be placed in water immediately after use to eliminate the small chance of self-ignition.
Keep out of reach of children.
Store in a cool place.
Louis Vuitton Shanghai Hongqiao Store, Solid Wood Flooring
Oak background
Spruce background