点击这里给我发消息
Maintenance
Advantage of Oiled Floor
  • Can be cleaned with water.
  • Floors can be quickly and easily maintained to achieve a refreshed look.
  • Local repair is possible
  • No stripping or sanding off is needed as with a varnished floor.
Cleaning
  • 1.Vacuum floor first.
  • 2.Clean the floor with damp mop. For heavily soiled floor, it is recommended to use Biohouse Cleaner or other floor cleaners formulated for oiled floor. In case of the latter, please carry out test on small area first.
Removal of Stains
  • Stains should be removed as soon as possible.
  • Marks not removable by normal cleaning can be cleaned using a ScotchBrite. A small amount of Biohouse SupperClean thinner or mineral spirits may be necessary.
  • Additional oil application in these areas might be required after removal of the stain.
Maintenance

Floor treated with Biohouse Hard Wax Oil needs infrequent maintenance, provided that the application amount of oil on unfinished floor is sufficient.For domestic area, maintain the floor normally once every one or two years. For commercial areas, maintenance should be done whenever necessary.

  • 1. Clean the floor as described in Cleaning.
  • 2. After dry, apply Biohouse Wood Care Wax with flat mop thinly and evenly on the surface
  • 3. Allow it dry for about half an hour.
Local Repair
  • For minor scratch, polish the surface with Biohouse polish pad and refinish locally.
  • Individual block or plank can be sanded and refinished to remove damage or dents.
Renovation

After long period of using, the entire floor may have to be renovated to remove excessive dirt build-up and to restore beauty.

  • 2. After dry, spread Hard Wax Oil very thinly on the floor with a scraper or brush.
  • 3. If the floor is very dirty, buff the floor with 3M black stripper pad #7200 or equivalent coarse pad at 300 rpm. Then wipe up the dirty surplus oil with cloths or rags before it dries. Dispose the used cloth or rag following the instruction described in Caution.
  • 4. Buff the floor with red pad at 150~300 rpm before it dries.
  • 5. Allow it dry for about 6 - 8 hours.
Caution

To avoid danger of spontaneous-combustion, any used cloth must be washed out or soaked in water immediately.